
Indoor Industrial Steel Framework Erection
The GSC30D caption identifies indoor framework erection. Review member weight, rigging, radius, headroom and the order of picks against the site plan.
Steel erection in confined work zones depends on the member weight, lifting height, radius and access route. Mini crawler cranes can position beams, columns or trusses when the load chart and setup fit the specific pick.
Model selection
Compare the load chart with each member, rigging plan, working radius, lift height and the place available to set up.



Field applications
The original galleries identify lifting and assembly tasks; the selected captions do not give project cities.

The GSC30D caption identifies indoor framework erection. Review member weight, rigging, radius, headroom and the order of picks against the site plan.

The source gallery shows a GSC30D hoisting structural beams. Confirm the beam weight, lifting points and clearance at both pick and set positions.

The GSC80D gallery identifies steel structure lifting. Match the member and rigging to the chart at the planned radius and machine configuration.

The original caption identifies roof truss lifting at a construction site. Confirm the route to the setup point, overhead clearance and sequence of picks.
Before the site visit
Record the narrowest clear opening, every turn, overhead clearance, floor conditions and the crane setup area. Include the path from delivery to the pick and set positions.
Use the doorway width measuring guide to record the clear opening before comparing equipment.
Planning questions
Share the member and site information needed to review the lifting plan.
Provide each member’s weight and dimensions, lifting points, rigging details, pick position and final set position.
Check the load chart for the planned radius, boom configuration and rigging. A model’s headline capacity alone does not establish capacity at the work position.
Measure the route, turns, overhead clearance, floor conditions and setup area. Include any floor loading limits or worksite restrictions you know.
That depends on the positions, radius and load for each pick. Share the sequence and a site sketch so each setup can be reviewed.
Project details
Share the member, route and site information available. GLT LIFTS can review which model details need to be checked.