Towable Boom Lift

As largest model in the GLT LIFTS towable boom lift rang, the GTB66 is built for higher reach and greater working envelopes. It is engineered for large-scale buildings and demanding outdoor sites where standard lifts fall short.

60–66 ft towable boom lifts are commonly used for high-access applications where contractors need vertical height and flexible positioning.

Typical applications include:

1. Commercial building maintenance

2. Exterior construction work

3. Sign installation

4. Electrical and lighting maintenance

5. Tree trimming and arborist work

6. Facility maintenance

7. Industrial equipment inspection

8. Rental fleet operations

Articulating towable boom lifts are especially useful when operators need up-and-over clearance around obstacles.

The GLT LIFTS GTB60 60 ft towable boom lift provides a maximum horizontal outreach of 39 ft 4 in (12 m). Its articulating lower boom and telescopic upper boom design create a flexible working envelope, allowing operators to reach over roofs, around obstacles, and access hard-to-reach areas with fewer repositioning requirements.

Actual working range may vary depending on boom position, platform load, and jobsite conditions. Refer to the GTB60 working range diagram for detailed lifting performance.

A 60 ft towable boom lift typically provides up to approximately 60 feet of Platform height, 65 feet working height depending on the boom configuration, platform position, load condition, and operating environment.

The actual working height may vary because the boom angle, horizontal outreach, and ground conditions affect the final platform position. When selecting a towable aerial lift, operators should consider both maximum height and horizontal reach rather than height alone.

Yes. The GTB52 towable boom lift is suitable for tree care, facility maintenance, construction, and commercial property maintenance. It provides a 52 ft 6 in (16 m) maximum platform height, 59 ft 1 in (18 m) maximum working height, and 34 ft 5 in (10.5 m) maximum horizontal outreach, making it suitable for a range of elevated maintenance and access tasks.

The GTB52 must be operated within its rated platform capacity, working envelope, wind limits, and approved equipment configuration. It should not be used as a crane, to push or pull objects, or with unauthorized platform extensions or attachments.

Before raising the GTB52 boom, the operator should:

1. Inspect the work area for soft or uneven ground, slopes, edges, holes, trenches, overhead obstructions, and power lines.

2. Position the machine on suitable ground and fully deploy the outriggers according to the operator’s manual.

3.Verify the platform load is within the rated 440 lb (200 kg) capacity, including occupants, tools, and materials.

4. Inspect key components and safety systems, including the boom, platform, guardrails, entry gate, hydraulic hoses, controls, alarms, emergency stop, and emergency-lowering system.

5. Check weather and wind conditions against the GTB52 operating limits and warning decals.

6. Confirm the occupants understand the communication and emergency-rescue procedures.

Do not operate the GTB52 if a defect affects the coupling, brakes, tires, wheels, structure, platform, controls, outriggers, alarms, or manual descent valve.

The GTB45 is well suited for residential construction, exterior painting, window cleaning, tree care and pruning, commercial property maintenance, and municipal street light or sign repairs. Its towable design and flexible boom reach make it suitable for a wide range of residential, commercial, and municipal high-access jobs.

We offer professional equipment loan services tailored specifically for B2B clients. Our heavy machinery payment plans are designed to help you buy a towable boom lift accessories while maintaining a healthy cash flow.

[Request a customized payment plan here] to get your equipment on-site with lower upfront costs.

It utilizes a standardized standardized 2-inch ball hitch coupler (Approx. 50mm).The ability to quickly connect and disconnect is key to its low logistics costs and high turnover rate.

Yes. The unit is designed for trailer towing and can be transported by a properly rated pickup truck or other suitable towing vehicle. The towing vehicle, hitch, and towing equipment must meet the applicable weight and towing requirements.

The fully extended outrigger footprint is 13' 9" × 14' 9"(4.2 × 4.5 m), This compact setup allows the equipment to achieve maximum stability even in tight spaces, narrow driveways, or confined indoor job sites without sacrificing working height.

The maximum permissible working wind speed for the GLT LIFTS towable boom lift is  24 mph (10.7 m/s). If actual wind speeds exceed this limit, the operator must immediately cease all operations, safely lower the platform to the stowed ground-level position, and retract the outriggers if necessary.

Yes, but proper safety measures must be taken. When deploying a towable boom lift on unpaved or soft surfaces—such as grass or mud—we strongly recommend placing heavy-duty Outrigger Pads beneath each stabilizer. This maximizes load distribution, drastically reduces ground bearing pressure, and effectively prevents stabilizer sinking or tipping hazards.

The Optimal Solution for Challenging Terrain:If your jobsites frequently involve muddy, soft, or rugged terrain, we highly recommend upgrading to a Crawler Spider Lift (such as our GCA66 series), which features rubber tracks designed for superior off-road stability and low ground pressure.

The platform dimensions for the towable boom lift are 2' 11"(L) × 2' 4" (W)× 3' 7"(H)（ 900 x 700 x 1100 mm）.This compact yet optimized working basket provides ample space for a single operator along with their essential tools and equipment, while allowing easy navigation through tight aerial spaces.

The maximum rated platform capacity is 440 lbs (200 kg), designed to safely accommodate up to two operators and their essential equipment. For ultimate peace of mind, GLT LIFTS engineers have built a 20% structural redundancy safety margin into the boom and hydraulic systems beyond the rated capacity, ensuring absolute stability during high-altitude operations under full load.

GLT LIFTS offers a comprehensive range of towable boom lifts to meet various aerial access requirements:

Max working heights : 39' 4" to 72' 2"（12 m – 22 m )

Max platform heights: 32' 10" to 65' 7" （10 m – 20 m）

Need help choosing?  Consult our experts now for a tailored solution to ensure you get the perfect GLT LIFTS towable boom lift for your project.

Our equipment is designed for maximum accessibility in narrow spaces.

Yes. GLT LIFTS towable boom lifts feature versatile power options for all job sites:

1. Outdoor: Powered by Gasoline or Diesel engines for continuous heavy-duty work.

2. Indoor: Powered by AC Plug-in or Lead-Acid Battery / Lithium-ion Battery for zero-emission, low-noise operation in warehouses, malls, and churches.

3. Bi-Energy (Hybrid): Combines engine and electric drives for ultimate indoor/outdoor switching.

The towable boom lift comes with a 1-year full-machine warranty. During the warranty period, GLT LIFTS provides free replacement parts, remote technical guidance from professional engineers, and localized service through its spare parts network to help minimize downtime. For specific warranty terms and coverage, please contact our support team.

The GTB52 uses automatic hydraulic outrigger leveling, outrigger sensors, anti-tipping protection, and outrigger interlocks to help establish a level and stable working position. These systems also help reduce the risk of operation when the outriggers are not properly deployed.

The operator must still confirm that the ground can safely support the machine and outrigger loads. Automatic leveling cannot compensate for soft soil, hidden voids, trenches, unstable edges, excessive slopes, or inadequate support pads.

The main risks include tip-over, falls from the platform, contact with overhead power lines, crushing or collision hazards, falling objects, and towing-related accidents. Risks can increase on soft or uneven ground, near unprotected edges, in high winds, with an overloaded platform, or when towing, braking, or safety components are defective. Always follow the manufacturer's operating instructions and applicable safety requirements.

Yes, towable boom lifts are extremely safe when operated by trained personnel on solid ground within rated limits. For the GLT LIFTS GTB52, safety is built directly into the hardware through automatic outrigger leveling, anti-tipping sensors, overload alarms, and a 3-way interlock system. However, safety ultimately depends on proper site assessment and following standard pre-use inspection protocols.

Yes. The GLT LIFTS GTB33 can be equipped with an optional Auxiliary Drive System (Assist Drive System). Once unhitched from your towing vehicle, a single operator can use the control handle to maneuver the lift effortlessly through narrow gates, residential backyards, and tight alleys without manual pushing.

The GLT LIFTS towable man lift is equipped with multiple redundant safety systems: Tilt Sensor, Emergency Stop Button, Lower Limit Switches, and Outrigger Interlocks.

• Diesel / Gasoline: For heavy-duty outdoor tasks.

• Lithium Battery: For zero-emission, low-noise indoor work.

• Bi-Energy: The ultimate flexibility for both.